Wednesday, July 24, 2019

A Guide for Transformer Fire Safety Practices

Although any fire can wreak havoc on a business, a transformer fire has the potential of causing a catastrophe. For that reason, it’s imperative that you follow the best safety practices to prevent and stop a fire. Thankfully, you have several viable options for transformer fire protection.

Among the best ways to do this is by using transformer fire separations. Acting as a physical barrier to fire, the right system keeps a blaze from spreading to adjacent transformers, buildings or other critical components of your operation. As a result you will minimize the impact to your business, with the damage limited to the failed transformer, and possibly spend less on insurance coverage.

The problem is that for years, both the probability and risk associated with a transformer fire remained relatively unknown. Today, business owners have a much better understanding of the different scenarios surrounding this type of event as well as the precautions they should take to ensure optimum protection and safety.

One challenge is that a transformer fire can result from a variety of things, including arcing within the tank, the volume of generated gas, an outdated electrical grid, increased demand, and even high pressure.

Read Original Source here

Contact Us:
DuraSystems Barriers Inc.
199 Courtland Avenue
Vaughan, Ontario
Canada, L4K 4T2
Call On: 1-905-660-4455 / 1-866-338-0988
Email: info@durasystems.com

Thursday, May 2, 2019

Fire Protection for Common Grease Ducts

grease duct

If there’s one thing restaurant owners worry about the most, it’s a kitchen fire. Considering chefs prepare delicious meals using grills and hot oils, one slip up could prove disastrous. In fact, a small uncontrolled flame can quickly spread and ignite an entire building. This is why it’s imperative that you take the appropriate steps to keep your grease ducts clean and use the appropriate fire protection systems.

The problem with grease ducts is that if not cleaned on a consistent basis, as required by local building codes, a grease buildup accumulates in no time. The other issue is that a lot of grease duct systems are difficult to reach and do not have access to the duct’s interior at locations where the duct can be reached. Without an easy to open access door, people can become complacent about removing grease and other residue. Therefore, you need to have a strict policy in place regarding your grease duct cleaning schedule and ensure you have the right grease duct system in place.

The good news is that you have multiple solutions available, all competitively priced. For example, to prevent the spread of a grease duct fire, you must have a system installed that meets all code compliance requirements. Not only must this product meet the requirements of the National Fire Protection Association, but also the International Mechanical Code and the National Building Code of Canada.

Read Original Source

Contact Us:
DuraSystems Barriers Inc.
199 Courtland Avenue
Vaughan, Ontario
Canada, L4K 4T2
Call On: 1-905-660-4455 / 1-866-338-0988
Email: info@durasystems.com

Wednesday, February 13, 2019

Passive Fire Protection System

building code fire protection requirements

As a business owner, you need to take the appropriate steps to ensure the safety of your employees and the security of the building. As part of this, you want the best possible passive fire protection system installed. This system must meet building code fire protection requirements and be compliant with North American codes and standards. Learn the difference between a fire partition and fire barrier, so you can choose the right one.

Fire Barrier vs. Fire Partition

People often use the terms “fire partition” and “fire barrier” interchangeably. Although the two are both types of passive fire protection systems, when it comes to building code fire protection requirements, they each have a different International Building Code or IBC definition. This means they must have a minimum fire protection rating.

When referring to a fire barrier, this serves as a type of structure that has at least a one-hour fire resistance rating. Based on the occupancy type and number of people working in the building, you can choose a barrier that provides up to four hours of protection.


Read Original Source

Contact Us:
DuraSystems Barriers Inc.
199 Courtland Avenue
Vaughan, Ontario
Canada, L4K 4T2
Call On: 1-905-660-4455 / 1-866-338-0988
Email: info@durasystems.com